Practical operation of steam wood drying room
1.In the drying room of the automatic system, the operator needs to input various parameters into the control system according to the drying benchmark conditions, and then start the operating device to make each actuator work and control according to the set values. The operator's job during duty is to record in detail the temperature of the drying medium and the specific values of the electromagnetic field. The automatic operating system has relatively low labor intensity for operators, but operators must have basic knowledge of wood drying production technology, be familiar with and master the specific performance of drying equipment. Otherwise, if problems occur during the wood drying process, they will be helpless, leading to drying defects in the wood and affecting the drying quality.
2.Manual drying control is relatively complex and technically demanding, requiring the operator to be familiar with wood drying technology. The operator's workload is relatively high. However, from the perspective of mastering wood production drying technology proficiently, manually controlled drying kilns are very advantageous for operators. Due to manual control of the drying kiln, all processes require the operator to personally operate and experience them. At the same time, the operator is required to concentrate their energy and always pay attention to discovering and solving problems.
Due to the scarcity and preciousness of redwood wood wood, it is recommended not to rely too much on automatic drying systems. At appropriate stages, manual intervention can be used to select automatic as semi-automatic.
Fujian Zhangping CHIQIN Technology Co. Ltd, is professional in wood drying over 20 years, covering Aluminum Wood Drying Kiln, Heat Pump Wood Drying Kiln without heat source, Veneer Drying Equipment, Wood carbonization kiln,Food Drying Kiln, Kiln Components etc with high quality and reasonable price. Hope to establish business relationship with you!
