Since the reform and opening up, my country's wood drying industry has developed rapidly. At present, it has become a complete industry system. Especially in recent years, with the gradual increase in the amount of wood used in my country, the wood drying market can be described as prosperous, which has brought a good opportunity for the rapid development of my country's wood drying industry. At present, my country's wood drying industry has the following characteristics:

Dry rooms are generally classified according to the following main characteristics.

The temperature and humidity of the gas medium in the wood drying chamber vary widely, the general working temperature is -30-100°C, the high temperature drying and superheated steam drying can be as high as 120°C, and the relative humidity is up to 100%. In addition, the drying medium also contains acidic substances such as formic acid, acetic acid, and tannin evaporated from the wood, and is continuously circulated indoors at a certain airflow speed. Therefore, the object of the drying room should have good heat preservation, sealing, and corrosion resistance. and anti-aging properties.

Modern metal shell wood drying rooms are almost all made of aluminum alloy materials. They have a beautiful appearance and can be used to build various large drying rooms in the open air.

Conventional aluminium alloy drying kiln,Exported to Chile, South America, packing and shipping tidbits!Made in China, old customers repurchase! I am grateful to meet every customer, every order is due to trust and recognition, and every satisfaction comes from quality!

Furnace gas drying chamber is a general term for various drying chambers with furnace gas as the heat source. According to the different heating methods, it can be divided into three types: furnace gas drying room, furnace gas indirect heating drying room and hot air drying room.

The requirement of the wood drying control system is to meet the control purpose to the greatest extent, and it should have the following characteristics:

In January of this year, the Chilean customer placed the first order, and this month, the customer placed another order, thank you for your trust.

In the pile, two adjacent layers of wood should be evenly separated by spacers, forming a horizontal airflow channel at the height of the pile. In the middle of these passages, the drying medium and the surface of the wood carry out heat and moisture exchange that is conducive to the gradual drying of the wood.

(1) The start of the drying room. Close the inlet and exhaust ducts; start the fans. For a reversible circulation drying room with multiple fans, start the fans one by one. Do not start several fans at the same time to avoid overloading the circuit; open the valve of the bypass pipe of the steam trap and open it slowly. Heater, to make the heating system heat up slowly and discharge the air, water and rust in the piping system at the same time, when a large amount of steam is ejected from the bypass pipe, then close the valve of the bypass pipe and open the steam trap valve to make the steam trap work normally .